Unitech PA968 Operation Manual
  1. Manuals
  2. Brands
  3. Unitech Manuals
  4. Handhelds
  5. PA968
  6. Operation manual

Unitech PA968 Operation Manual

Hide thumbs Also See for PA968:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Quick Reference Manual
Unitech Electronics Co., Ltd.
Operation Manual
Modified
PA968 Operation
by Ling
Manual
PA968
(CE 5.0)
Last modified: Nov. 10th, 2008
V1.0
Page 1 of 117

Advertisement

Table of Contents
loading

Related Manuals for Unitech PA968

Summary of Contents for Unitech PA968

  • Page 1 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 1 of 117 by Ling Manual PA968 Operation Manual (CE 5.0) Last modified: Nov. 10th, 2008...

  • Page 2: Table Of Contents

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 2 of 117 by Ling Manual Table of Contents Chapter 1 Introduction ..................4 Chapter 2 Tools/Utilities/A pplications............5 2.1 Bootmode ...................6 2.2 Device Setting..................7 2.2.1 Info....................7 2.2.2 FuncKey ...................8 2.2.3 IO....................9 2.2.4 Server ......
  • Page 3 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 3 of 117 by Ling Manual 3.5 Internet Options ................69 3.6 Keyboard ..................72 3.7 Owner ....................73 3.8 Password ..................75 3.9 PC Connection..................76 3.10 Power....................77 3.11 Regional Settings ................79 3.12 Remove Program..

  • Page 4: Chapter 1 Introduction

    Page 4 of 117 by Ling Manual Chapter 1 Introduction This operation manual aims at instructions of using Unitech’s applications, some useful application programs under “Windows” folder, setting application under “Control Panel” and available function keys in WinCE 5.0 environment.

  • Page 5: Chapter 2 Tools/Utilities/Applications

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 5 of 117 by Ling Manual Chapter 2 Tools/Utilities/Applications This chapter introduces some applications, which are embedded in the firmware, and they offer additional facilities and usage to users. All Applications: 1.

  • Page 6: Bootmode

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 6 of 117 by Ling Manual 2.1 Bootmode Path: Start Menu/Programs/Utilities/BootMode This tool allows you to perform warm boot or cold boot. Warm Boot 1. Select Start Menu -> Programs -> Utilities -> BootMode...

  • Page 7: Device Setting

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 7 of 117 by Ling Manual Cold Boot Note: Backup your data first! 1. Tap “BootMode”, and tap “Cold Boot”. Then confirm the choice by selecting YES when program asked to reconfirm the command.

  • Page 8: Funckey

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 8 of 117 by Ling Manual 2.2.2 FuncKey 1. Tap “FuncKey” tab. Four hot keys can be changed by users. 2. Tap “Func 6”. Tap “Browse”. Tap “Set” Button.
  • Page 9 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 9 of 117 by Ling Manual 3. Exit to Funckey windows. Tap “OK”. Func6 will call the application that the users specified. You can repeat the steps for Func7, Func8, and Func9.

  • Page 10: Server

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 10 of 117 by Ling Manual 3. When enable, SD card or wireless CF card is always accessible; when disabled, SD card or wireless CF card is not accessible. 2.2.4 Server Server Manager is a tool for the user to manager the NTLM (Windows NT LAN Manager) users, FTP users and telnet users.
  • Page 11 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 11 of 117 by Ling Manual 3. Key in the user name and password. Tap OK. 4. To modify a user’s password, select the user and tap “Modify”. 5. Enter the new password and confirm password. Tap OK.
  • Page 12 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 12 of 117 by Ling Manual the user X? Tap “Yes”. Telnet 1. Under “Telnet” tab, tap “Add”. Add the telnet user from NTLM. 2. Select the user and tap “Add”.

  • Page 13: Virtual Key

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 13 of 117 by Ling Manual 2. For telnet server setting, enable/disable server. 3. For FTP server setting, enable/disable server and define anonymous login. Save 1. Tap “Save” to save the server settings.
  • Page 14 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 14 of 117 by Ling Manual 2. Check “Enable Virtual Keys Applet”. Tap “Set”. Tap OK. 3. Open MS WordPad and test alpha keys. Press “alpha” key and press numeric key. The characters output as alpha keys.

  • Page 15: Screen

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 15 of 117 by Ling Manual 2.2.6 Screen 1. Tap Rotate Right. Screen rotate to the right. 2. Tap Rotate Left. Screen rotate to the left. 3. Tap Upside Down. Screen rotate upside down.

  • Page 16: Cpu

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 16 of 117 by Ling Manual 2. Check “Constant Ping” so that your terminal will continuously ping to the remote device. 3. Tap “Start”. The terminal will search for the remote computer with the IP address, which you entered.

  • Page 17: Backup

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 17 of 117 by Ling Manual consuming. 2. Select “Most Power Saving”. This will save the battery power but the efficiency is lower. 3. Select “Dynamic arrange”. This will let the speed changes according to the system status.
  • Page 18 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 18 of 117 by Ling Manual 1. Run RDP Set. Select the computer you want to telnet, from the pull down menu. Tap “Connect”. 2. Tap “Option”. Tap “General” tab. 3. Select the computer you want to telnet. Enter the login user name, password and domain.
  • Page 19 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 19 of 117 by Ling Manual 5. Tap “Local Resources” tab. Define how you would want the sound to perform and define keyboard combination application. 6. For local devices, define whether you want to connect to local devices such as “Disk Drives”, “Serial Ports”...

  • Page 20: Wavtest

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 20 of 117 by Ling Manual 8. Tap “Experience” tab, define the connection speed from the drop down list. Check or uncheck other options. 2.4 WavTest Path: Start Menu/Programs/Utilities/WavTest This tool is to test the audio recording and display.
  • Page 21 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 21 of 117 by Ling Manual 2. Select the frequency. Change to “Stereo”. Tap “Rec”. Talk near to the microphone port of the terminal. 3. Tap “Stop” to stop recording. Tap “Play” to play the audio you just recorded.

  • Page 22: Taskmanager

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 22 of 117 by Ling Manual 2.5 TaskManager Path: Start Menu/Programs/Utilities/Taskman Hot key: “FUNC” key + “6” key This tool shows the tasks that are running currently. 1. Select Start Menu -> Programs -> Utilities -> Taskman.
  • Page 23 Ling Manual 1. Under Start Menu -> Settings -> Control Panel -> System -> Device Name, type a name for the device, PA968, for example. Tap OK. 2. Tap PC Connection in the Control Panel. Tap Change Connection. Select USB.
  • Page 24 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 24 of 117 by Ling Manual 10. Choose a method to connect to the selected desktop computer. Select Network Connection. Connect to <the host>. Tap Connect. A window prompts up “Establishing connection to desktop computer. Please wait…...

  • Page 25: Scanner

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 25 of 117 by Ling Manual 2.7 Scanner Path: Start Menu/Settings/Control Panel/Scanner Hot key: “FUNC” key + “7” key This tool allows you to make some settings on scanner such as barcode symbologies, barcode IDs, data options, data editing, scanning options in order to change the scanner behavior.
  • Page 26 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 26 of 117 by Ling Manual 3. Tap “+” in front of “Barcode Symbologies”. You will see a list of available barcode type. 4. Tap “+” to expand the tree. Under each barcode type, there are more options such as enable/disable, check digit verification, transmit check digit etc.
  • Page 27 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 27 of 117 by Ling Manual 5. Tap Tools at the bottom. Select “Refresh Settings” to retract the sub-options. 6. Tap “+” in front of “Barcode Symbologies 2D”. You will see a list of available barcode type.

  • Page 28: Data Options

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 28 of 117 by Ling Manual The scanner decoder will work as what you have specified. 2.7.2 Data Options 1. Under Settings tab, tap Data Options. 2. If you check “Convert control key to <xx>”, the control key will be displayed as Hexadecimal code.

  • Page 29: Scanning Options

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 29 of 117 by Ling Manual 5. Check “Transmit function code” to transmit a function code. 6. Double tap “Prefix” or “Suffix” if you want to add them to the barcode. Key in the special character stated in the Set Data window.
  • Page 30 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 30 of 117 by Ling Manual direction. Select “Non Omni Direction” and “Omni Direction” to scan “Stacked” 2D barcodes from left to right or vice versa. 3. Double tap “Decode timeout”. Drag to define the decode timeout. Tap OK.
  • Page 31 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 31 of 117 by Ling Manual 5. Double tap “Good read delay”. Drag to define the minimum amount of time before another barcode can be read. Tap Ok. 6. Double tap “Reread delay”. Drag to define the interval before the imager can...
  • Page 32 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 32 of 117 by Ling Manual 7. Double tap “Aimer mode” to select the aimer mode as required. Select “Interlaced”, the aimer and illumination LEDs are not allowed to be on at the same time.
  • Page 33 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 33 of 117 by Ling Manual 9. Double tap “Aimer cycle duration”. Drag to define the amount of time that the aimers flash during a bar code capture. After that time, the aimers remain off until a decode or a “No Read Timeout”...
  • Page 34 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 34 of 117 by Ling Manual 12. Check “Multiple symbols mode” to turn on the multiple symbols. Press the trigger key to scan the barcode. The imager will not stop until the trigger is released or a “No Decode”...
  • Page 35 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 35 of 117 by Ling Manual 15. If you check “Good-read vibration”, the device will vibrate after good reading. 16. If you check “Good-read echo mode sync with OS”, the echo mode will sync with your OS.

  • Page 36: Imaging Options

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 36 of 117 by Ling Manual 2.7.4 Imaging Options 1. Under “Settings” tab, tap “Imaging Options”. Double tap “Capture mode”. Select “barcode image”, you can produce a darker image with less noise.
  • Page 37 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 37 of 117 by Ling Manual 3. Double tap “Aimer mode” to decide if you want to turn the aimer on. 4. Double tap “Exposure”. Drag to define exposure value.
  • Page 38 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 38 of 117 by Ling Manual 5. Double tap “Gain” to decide the gain value for an image. “1x” = No gain. “2x” = medium gain. “4x” = Heavy gain. 6. Double tap “Frame rate” to select the number of frames per second. The...
  • Page 39 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 39 of 117 by Ling Manual 7. Check “Histogram stretching” to enhance the image contrast. 8. Check “Infinity filter” if you want to take picture of an item from a very long distance.
  • Page 40 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 40 of 117 by Ling Manual 11. Double tap “Pixel subsampling” to define image data within the image window to be subsampled. Default 1 means no subsampling. 12. Double tap “Gamma” to define the gamma value. Gamma measures the brightness of midtone values produced by the image.

  • Page 41: Power Management

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 41 of 117 by Ling Manual An image can be transferred three ways: uncompressed (none), losslessly compressed (Adaptive Huffman Encoding), or JPEG lossy compressed. 14. Double tap “JPEG quality”. Drag to define the Q factor. The higher the Q factor, the better the image quality.
  • Page 42 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 42 of 117 by Ling Manual time the engine waits to return to idle mode after a decode or image capture. 2. Double tap “Imager idle timeout” to define the time the engine must be idled before timing out.

  • Page 43: Miscellaneous Options

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 43 of 117 by Ling Manual 4. Double tap “Imager CPU speed” to decide the engine’s system clock speed. By slowing down the processing speed, power will be saved. 2.7.6 Miscellaneous Options 1.

  • Page 44: Tools And Mode Switch

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 44 of 117 by Ling Manual 2. Check “Enable log” to produce a “scanner.txt” for the scanning data. 2.7.7 Tools and Mode Switch 1. Tap Tools at the bottom. A selection menu pops up. You can select to load existing scanner settings, or save the current settings as *.USI file.
  • Page 45 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 45 of 117 by Ling Manual original defaults. 4. Under Test tab, tap Tools at the bottom. Select “Enable Scan”. Press the trigger key or tap “T!” button at the bottom. Laser emits for reading barcode.
  • Page 46 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 46 of 117 by Ling Manual 6. Tap Save To File. Save the scanned content as a file. 7. Tap Edit at the bottom. Select “Clear Window”, all the contents in the window will be erased.

  • Page 47: Scan2Key

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 47 of 117 by Ling Manual image. The image will be shown on the screen. Or you can tap T! at the bottom to enable auto-scan in image mode. 10. Tap Mode again to switch back to text mode.

  • Page 48: Scan2Key

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 48 of 117 by Ling Manual 2. Define inter character and shift key delay. Barcode will read and output in the speed defined. 3. Under Version tab, view the decoder version and USI version.
  • Page 49 2. Execute the word processor, MS WordPad, for example. You can scan barcodes and display the scanned data on the screen. 3. Tap “Test” to test the performance. “unitech-abcde-12345” displays on the screen. 4. Tap “Disable Scan”. You can disable the scanner for barcode scanning.

  • Page 50: Camerademo

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 50 of 117 by Ling Manual Check “From COM Port”, you can define COM port’s parameters and read barcodes into the terminal application from a COM port you specified via an external device.
  • Page 51 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 51 of 117 by Ling Manual 2. Tap “Capture”. Tap the down arrow and check “Enable Flash” if you want to use the flashlight. 3. Tap “Capture”. Tap the down arrow to select “Capture Settings”. Under...
  • Page 52 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 52 of 117 by Ling Manual 4. Under Image tab, define image dimension and storage folder. Uncheck “Using Default Naming” if you want to specify the file name. Tap OK. 5. Under Video tab, define video dimension, frame rate, and storage folder.
  • Page 53 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 53 of 117 by Ling Manual 6. Tap “Capture”. Tap the down arrow to select “Camera Settings”. Uncheck “Auto Exposure” if you want to define the value yourself. Drag the bar to define the integration time and gain per pixel.
  • Page 54 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 54 of 117 by Ling Manual 8. Tap “Capture”. Tap the down arrow to select “Flicker Detection”. Select the flicker frequency. Tap OK. 9. Tap “Preview” and select “Start” to open the preview window.
  • Page 55 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 55 of 117 by Ling Manual 11. Select “End Video” or “End AV” to stop capturing a video or audio. Select “End Video Stream” or “End Audio Stream” to stop capturing streaming video or record streaming audio.

  • Page 56: Fingerdemo

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 56 of 117 by Ling Manual “Pause” to pause the video/ audio file. Select “Continue” to resume playing. Select “Stop” to stop playing. Select “End Mp2” to stop playing the Mp2 file.
  • Page 57 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 57 of 117 by Ling Manual 3. Tap “Enroll” to enroll a fingerprint. “Please sweep your finger!” message pops up. 4. Gently sweep the finger inwards on the reader five times following on-screen instructions until a pop-up window appears informing you the reading quality.
  • Page 58 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 58 of 117 by Ling Manual Note: Class A represents a high quality of the enrolled fingerprint data, while Class C a low quality. 5. Tap “Match” to carry out identification. “Please sweep your finger!” message pops up.

  • Page 59: 32Wandemo

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 59 of 117 by Ling Manual 2.11 32WANDemo Path: Start Menu/Programs/GPRS/32WANDemo This tool is to demonstrate GPRS connection. NOTE: Please turn off SIM card lock if your SIM card is password protected.
  • Page 60 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 60 of 117 by Ling Manual 3. The screen displays “Modem Power Status is ON”. Tap OK. 4. Select Start Menu -> Programs -> GPRS -> 32WANRAS. The 32WANRAS DialUp window appears. Tap “Open Connection”.

  • Page 61: Gps Info

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 61 of 117 by Ling Manual 6. The GPRS icon on the taskbar indicating the signal strength. Tap “Disconnect Connection”, you can end the GPRS connection. 2.12 GPS Info Path: My Device/Flash Storage/GPS Utility/GPSinformation...
  • Page 62 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 62 of 117 by Ling Manual 1. Select My Device -> Flash Storage -> GPS Utility -> GPSinformation. The GPS Info window appears. 2. Select “COM5” and tap “Start GPS”. The tool starts to receive GPS signal.

  • Page 63: Chapter 3 Control Panel

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 63 of 117 by Ling Manual Chapter 3 Control Panel This chapter introduces settings under “Control Panel”. All Settings: 1. Backlight 2. Date/Time 3. Display 4. Input Panel 5. Internet Options 6.

  • Page 64: Backlight

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 64 of 117 by Ling Manual 3.1 Backlight Path: Start Menu/Settings/Control Panel/Backlight This setting allows you to save the battery power and external power. 1. Double tap Backlight. 2. Select “Battery Power”. You can set the backlight auto off for battery power.

  • Page 65: Date/Time

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 65 of 117 by Ling Manual down menu. The light of the screen backlight will dim after the idle time specified. If you do not want to set backlight dim, please uncheck this option.

  • Page 66: Display

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 66 of 117 by Ling Manual 3.3 Display Path: Start Menu/Settings/Control Panel/Display This setting allows you to set the style of the windows background, the color and pattern of windows and determine the backlight off time.

  • Page 67: Input Panel

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 67 of 117 by Ling Manual 4. Under “Backlight”, you can save battery life by turning off the backlight. If you do not want to turn off backlight, please uncheck this option.
  • Page 68 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 68 of 117 by Ling Manual software keyboard. 1. Double tap “Input Panel”. 2. For “current input method”, select the input method you prefer. Tap “OK”. 3. Tap “Options”. You may specify the large keys or small keys. For example, select “Large keys”.

  • Page 69: Internet Options

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 69 of 117 by Ling Manual side and right side to see the effect. 3.5 Internet Options Path: Start Menu/Settings/Control Panel//Internet Options This setting allows you to specify the home page, clear cache, specify connection, define the security and make advance settings of the IE browser.
  • Page 70 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 70 of 117 by Ling Manual 3. Under “Connection”, specify the network connection you want the browser to connect to the network. 4. Under “Security”, specify the security option for your browser.
  • Page 71 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 71 of 117 by Ling Manual 3. Under “Privacy” tab, define the cookies. Under “Advanced” tab, click and select the options you want the browser to apply.

  • Page 72: Keyboard

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 72 of 117 by Ling Manual 5. Under “Popups”, check “Block popups” to block any pop up windows. Check “Display notification when a popup has been blocked”, check “Open new pages in the current window”.

  • Page 73: Owner

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 73 of 117 by Ling Manual 2. Check “Enable character repeat”. 3. Adjust the repeat delay and repeat rate. 4. Place the cursor in the field of “Tap here and hold down a key to test”.
  • Page 74 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 74 of 117 by Ling Manual 2. Key in the name of the owner, company and the address of the company. Check “Display owner identification”. Tap OK. The system will display the owner identification after suspend.

  • Page 75: Password

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 75 of 117 by Ling Manual 4. Under “Network ID”, specify the user name and password that allow you to access the network. 3.8 Password Path: Start Menu/Settings/Control Panel/Password This setting is to protect the terminal from other users to access the windows by setting a unique password.

  • Page 76: Pc Connection

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 76 of 117 by Ling Manual 2. Key in your password twice. Check “Enable password protection at power on”. 3. Warm start your terminal. Enter your password to login. 3.9 PC Connection...

  • Page 77: Power

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 77 of 117 by Ling Manual 3. Select the type of communication that you connect the terminal to your host. Tap OK. 3.10 Power Path: Start Menu/Settings/Control Panel/Power This setting is to show the power voltage of the batteries, besides allow you to...
  • Page 78 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 78 of 117 by Ling Manual suspend the terminal after a time interval to save the power. 1. Double tap “Power”. 2. Under “Battery” tab, the screen shows you the status and voltage of main battery and backup battery.

  • Page 79: Regional Settings

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 79 of 117 by Ling Manual 3.11 Regional Settings Path: Start Menu/Settings/Control Panel/Regional Settings This setting is to set the regional settings, currency, date format etc. 1. Double tap “Regional Settings”.

  • Page 80: Remove Program

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 80 of 117 by Ling Manual 3.12 Remove Program Path: Start Menu/Settings/Control Panel/Remove Programs This setting is to allow you to remove unwanted programs. 1. Double tap “Remove Programs”. 2. Select the program you want to remove. Tap “Remove”.
  • Page 81 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 81 of 117 by Ling Manual 4. Tap “Format” if you want to format your memory card. Tap “Yes” to confirm to erase data. 5. Tap “Dismount” to dismount disk. 6. To make a new partition, tap “New” and type in the name of the partition.
  • Page 82 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 82 of 117 by Ling Manual 7. Select a partition. Tap “Properties”. 8. Tap “Mount” to mount this partition. Or tap “Dismount” to dismount the partition. 9. Tap “Format” to format this partition.
  • Page 83 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 83 of 117 by Ling Manual 11. Tap “Defrag” to defrag this partition. Tap “Start”. 12. Select a partition you want to delete. Tap “Delete”. Tap “Yes”. Note: You must “Dismount” the partition before you delete it.

  • Page 84: Stylus

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 84 of 117 by Ling Manual 3.14 Stylus Path: Start Menu/Settings/Control Panel/Stylus This setting is to set the sensitivity of the tapping and to do the calibration while the original screen calibration is no longer accurate.

  • Page 85: System

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 85 of 117 by Ling Manual 3. Use the stylus to touch the “+” (Center, Top left, Bottom left, Bottom right, Top right), then press “Enter” key. 3.15 System Path: Start Menu/Settings/Control Panel/System This setting is to show you the general information of the system and allow you to adjust the size of storage memory and program memory.
  • Page 86 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 86 of 117 by Ling Manual 3. Under Memory tab, adjust the size of the memory by using the slider. 4. Under Device Name tab, specify the name of the device.

  • Page 87: Volume & Sounds

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 87 of 117 by Ling Manual 3.16 Volume & Sounds Path: Start Menu/Settings/Control Panel/Volume & Sounds This setting allows you adjust the volume of the tapping, key clicks, events, notifications etc. Also, it allows the user to specify the type of sounds for a special event and set a scheme for the sounds.
  • Page 88 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 88 of 117 by Ling Manual 3. Under Sounds tab, to build a new scheme, tap “Save As”. 4. Enter a name for the scheme. 5. Under “Events”, click any events. Select the sounds. Tap the Preview button to listen to the sounds.

  • Page 89: Chapter 4 Function Keys

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 89 of 117 by Ling Manual Chapter 4 Function Keys This chapter introduces available function keys. All Function Keys: 1. Func + Esc (Calibration) 2. Func + 6 (Task Manager) 3. Func + 7 (Scanner Setting) 4.

  • Page 90: Func + 6

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 90 of 117 by Ling Manual 4.2 Func + 6 Pressing Func key and numeric key “6” will execute Task Manager. 4.3 Func + 7 Pressing Func key + numeric key “7” will execute scanner settings.

  • Page 91: Func + 8

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 91 of 117 by Ling Manual 4.4 Func + 8 Pressing Func key and numeric key “8” will execute power management. 4.5 Func + 9 Pressing Func key and numeric key “9” will show the device information.

  • Page 92: Func

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 92 of 117 by Ling Manual 4.6 Func + Press Func key and top arrow key to toggle LCD backlight on/ off. 4.7 Func + Press Func key and down arrow key to toggle keypad LED backlight on/ off.

  • Page 93: Func

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 93 of 117 by Ling Manual 4.8 Func + Press Func key and right arrow key will increase the screen brightness. 4.9 Func + Press Func key and left arrow key will decrease the screen brightness.

  • Page 94: Chapter 5 Wireless Lan Connection

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 94 of 117 by Ling Manual Chapter 5 Wireless LAN Connection This chapter describes how to set up a wireless connection. 5.1 Wireless Connection 1. Tap Start Menu/Programs/Summit/scu. The Summit Client Utility window appears.
  • Page 95 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 95 of 117 by Ling Manual 3. A pop-up window appears “A Power Cycle is required to make settings activate properly”. Tap OK, and then tap OK to exit the Summit Client Utility.
  • Page 96 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 96 of 117 by Ling Manual 5. The RF setting window pops up once the RF signal is detected. Tap “Add New” or double tap a preferred network. 6. Enter the Network name (SSID). Uncheck “The key is provided...

  • Page 97: Summit Client Utility

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 97 of 117 by Ling Manual 6. The network icon appears on the taskbar when the RF is connected. 5.2 Summit Client Utility This tool allows you to setup and manage wireless connection.
  • Page 98 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 98 of 117 by Ling Manual 2. Enter the Admin Password, SUMMIT, by default. 3. Under “Profile” tab, tap “Scan” for available AP.
  • Page 99 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 99 of 117 by Ling Manual 4. Select a desired AP to create a new profile. Tap “Configure”. 5. Tap “Yes” to create the new profile.
  • Page 100 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 100 of 117 by Ling Manual 6. Enter the WEP key or network key. Tap OK. 7. Tap “Commit” to activate the setting.
  • Page 101 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 101 of 117 by Ling Manual 8. Under “Main” tab, select the profile you want to activate. 9. A pop-up window appears “A Power Cycle is required to make settings activate properly.” Tap OK, and then tap OK to exit the Summit Client Utility.

  • Page 102: Wifi Tool

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 102 of 117 by Ling Manual 11. Double tap this icon to bring up Summit Control Utility. Tap “Disable Radio”, you can disconnect the AP. Under “Status” tab, you can see the IP address, signal strength and quality.

  • Page 103: Info

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 103 of 117 by Ling Manual wireless LAN. Path: Start Menu/Programs/Communication/WiFiTool 5.3.1 Info This will show the RF info including SSID, channel, signal, MAC address and WiFiTool version. 5.3.2 IP Under “IP” tab, you can check the IP address, Gateway, DHCP, etc.

  • Page 104: Rf Power

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 104 of 117 by Ling Manual 5.3.4 RF Power Under “RF Power” tab, you can select the RF Power saving mode. Tap “Apply” to confirm. 5.3.5 Ping Under “Ping” tab, you can ping to other device in the LAN network.
  • Page 105 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 105 of 117 by Ling Manual In the Host field, enter the IP address of the device you want to ping to. Check “Constant Ping” so that your terminal will continuously ping to the remote device.

  • Page 106: Chapter 6 Bluetooth Connection

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 106 of 117 by Ling Manual Chapter 6 Bluetooth Connection 6.1 Bluetooth Printer Equipment used (Example) Zebra Printer QL320 with integrated BT module 1. Tap Start Menu/Programs/Bluetooth/BTPowerON. 2. Select “Bluetooth Module Power On”. Tap OK.
  • Page 107 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 107 of 117 by Ling Manual After 10 to 30 seconds, the Zebra QL320 is found. 6. Double tap the printer icon to get the context menu. 7. Tap “trusted”. A dialog box appears asking if authentication is required.
  • Page 108 Page 108 of 117 by Ling Manual 8. Depending on your setup, select Yes or No. In Unitech’s testing, select No, for example. 9. Double tap the printer icon again to get the context menu and uncheck Authenticate and Encrypt. Then check Active.
  • Page 109 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 109 of 117 by Ling Manual 6. Tap Start Menu/Programs/Bluetooth/BTPrinter. 7. BTPrinter icon appears on taskbar. 13. Double tap the icon. BTPrinter window pops up. Tap “Inquiry”.
  • Page 110 13. Tap the icon again, at the bottom of BTPrinter, you will see XXX running on COM7. 14. Run ZebraPrintUtility (You can get it from unitech) 15. On serial port field, enter “COM7”. Tap “Open Port”. 16. Tap “File Name”. Select the label you want to print.

  • Page 111: Bluetooth Phone

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 111 of 117 by Ling Manual 17. Tap “Send/Print file”. Label is printed out. 18. Tap “Exit” in BTPrinter to terminate BT print. 6.2 Bluetooth Phone This tool allows you to make synchronization with your Bluetooth mobile phone.
  • Page 112 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 112 of 117 by Ling Manual Test Connection 1. Tap Start Menu/Settings/Network and Dial-up Connections, double tap “Bluetooth Modem”. 2. Tap “Dial Properties”. 3. Tap “Edit”...

  • Page 113: Bluetooth Activesync

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 113 of 117 by Ling Manual 4. Enter “G” for every call pattern. 5. Tap OK, OK. Tap “Connect”. The terminal connected to the mobile phone via Bluetooth. 6.3 Bluetooth ActiveSync This tool allows you to make synchronization with your remote device through the Bluetooth ActiveSync.
  • Page 114 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 114 of 117 by Ling Manual 3. The ActiveSync window pops up. Tap “More”. 4. Tap “Inquiry”. Select the Bluetooth device you want to sync. Tap OK.

  • Page 115: Bluetooth Manager

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 115 of 117 by Ling Manual 5. Tap BTActiveSync icon again. Tap “Sync”. ActiveSync begins. 6.4 Bluetooth Manager This tool allows you to access available Bluetooth services, such FTP, ActiveSync, modem, audio, etc.
  • Page 116 Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 116 of 117 by Ling Manual 3. Under “Service” tab, you can view available Bluetooth services. 4. Tap “About” to view the version information, terminal MAC address, etc. 5. Tap “Power ON/ OFF” to turn on/ off Bluetooth module power. Tap Yes.

  • Page 117: Modified Pa968 Operation

    Unitech Electronics Co., Ltd. Modified PA968 Operation V1.0 Page 117 of 117 by Ling Manual 7. Tap “ActiveSync” to make synchronization with your remote device. Tap Yes. 8. Tap “Modem” to make synchronization with your Bluetooth mobile phone. 9. Tap “Audio” to turn on audio gateway. Tap Yes. You can allow the remote device to use the terminal speaker and microphone.

Table of Contents