Basic hardware procedures
4.4.3
Opening the server
V
CAUTION!
Before removing or installing covers, turn off the server and all
●
peripheral devices. Also unplug all power cables from the outlet.
Failure to do so can cause electric shock.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY RX4770 M1 server must not run while the housing cover
is removed.
For further safety information, please refer to chapter
●
information" on page
4.4.3.1
Removing the housing cover
Figure 5: Removing the housing cover
Ê Remove the little screw (see circle in figure above) and put it in a safe place.
Ê Press on both green touch points, shift the server in the direction of the arrow
as far as it will go and lift off the housing cover.
50
29.
Upgrade and Maintenance Manual
"Important
RX4770 M1