Fujitsu Primergy RX4770 M1 Upgrade And Maintenance Manual page 307

I
Install all expansion cards into their original slots.
"Reassembling" on page 51
Ê
Ê If applicable, activate TPM functionality in the system BIOS under Security >
TPM (Security Chip) Setting > Security Chip. For more information, refer to the
corresponding BIOS Setup Utility Reference Manual.
Ê Reconnect all external cables.
"Connecting the server to the power source" on page 55
Ê
"Updating or recovering the system board BIOS and iRMC" on page 65
Ê
"Verifying system information backup / restore" on page 68
Ê
"Verifying the system time settings" on page 76
Ê
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
on page 82.
Ê After replacing the system board in a server running Linux OS,
NIC configuration file in a Linux environment" on page 78
"Enabling SVOM boot watchdog functionality" on page 74
Ê
"Enabling BitLocker functionality" on page 80
Ê
Ê Reconfigure your network settings in the operation system according to the
original configuration of the replaced controller (expansion card or onboard).
I
Configuration of network settings should be performed by the
customer.
For further information, please refer to section
settings recovery" on page
Ê If applicable, "After replacing the system board" on page
RX4770 M1
"Looking up changed MAC / WWN addresses"
297.
Upgrade and Maintenance Manual
System board and components
"Note on network
85.
"Updating the
307