4.5
Reassembling
4.5.1
Closing the server
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY RX4770 M1 server must not run while the housing cover
is removed.
For further safety information, please refer to chapter
●
information" on page
4.5.1.1
Mounting the housing cover
Figure 6: Mounting the housing cover
Ê Place the housing cover onto the server such that it projects approximately
2 cm at the back (see circle in figure above).
Ê Push the housing cover in the direction of the arrow until it engages.
RX4770 M1
29.
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
51