Figure 10-2 Input Mac - ZyXEL Communications AES-100 User Manual

Click the New button to create a MAC address entry. The Input Box window will pop up as shown next.
Step 5.
Input the MAC address of the AES-100 and then click OK. You can find the MAC address of the AES-
Step 6.
100 on its boot console.
Set up the host address (the IP address you want to assign to the AES -100), server address (the IP
Step 7.
address of this computer), net mask, gateway and filename (the new firmware name). Click Update
Database .
Firmware Upload

Figure 10-2 Input MAC

AES-100 User's Guide
10-3