Trap Add Command; Trap Delete Command; Trap Flush Command; Trap List Command - ZyXEL Communications AES-100 User Manual

8.4.2

Trap Add Command

Syntax:
trap add <community> <IP addr> [<port>]
where
<community> =
<IP addr> =
[<Port>] =
This command adds a trap server.
8.4.3

Trap Delete Command

Syntax:
trap delete <community> <IP addr> [<port>]
This command deletes a trap destination. The parameters are the same as the
8.4.4

Trap Flush Command

Syntax:
trap flush
This command deletes all trap destinations.
8.4.5

Trap List Command

Syntax:
trap list
This command lists all the trap destinations.
Remote Management
The password used by the AES-100 to authenticate itself to the trap server.
The IP address of the trap server.
The optional port parameter is for specifying the UDP port number on the
server in case it is different from the default of port 162.
AES-100 User's Guide
command.
trap add
8-5