Lineperf Command - ZyXEL Communications AES-100 User Manual

Total Transceiver Output Power
Current ATUR Information:
Country code 0
Provider Code 01020304
Capabilities:
g.dmt POTS overlap (Annex A)
The results contain the operating modes, interleave delay, parity byte assignment, parity bytes per codeword,
symbols per codeword and interleave depth. Current ATUR Information contains data acquired from the
ATU-R (stands for ADSL Termination Unit – Remote, in this case the user's ADSL modem or router) during
negotiation/provisioning message interchanges. It includes the Vendor ID and Version Number obtained from
Vendor ID fields (g.994.1) or R-MSGS1(T1.413) and country code from Vendor ID (g.994.1).
Information obtained prior to training to steady state transition will not be valid or will be old information.
4.4.8

Lineperf Command

Syntax:
lineperf <port number>
where
<port number> = port number, from 1 to 8
The command shows the line performance counters of an ADSL port.
lineperf
An example is shown next.
192.168.1.1 adsl> lineperf 7
nfebe-I/nfebe-ni
ncrc-I/ncrc-ni
nfecc-I/nfecc-ni
nfec-I/nfec-ni
nblks-ds/nblks-us
nsec-ds/nsec-us
n-eb-ds/n-eb-us
n-bbe-ds/n-bbe-us
n-es-ds/n-es-us
n-ses-ds/n-ses-us
non-ses-blks-ds/non-ses-blks-us : 120878/120878
n-uas-ds/n-uas-us
ADSL Configuration
: 8dB
: 0/0
: 0/0
: 0/0
: 0/0
: 120878/120878
: 2060/2060
: 0/0
: 0/0
: 0/0
: 0/0
: 0/0
AES-100 User's Guide
4-5