ZyXEL Communications AES-100 User Manual page 40

Adsl-ethernet switch

Hide thumbs Also See for AES-100:

Table of Contents

AES-100 User's Guide

The

command sets or displays the port-based VLAN configuration.

portfilter

An example is shown next.

192.168.1.1 > bridge

192.168.1.1 bridge> portfilter

Port 1 (edd):

Port 2 (bun/port=atm:0/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33):

Port 3 (bun/port=atm:1/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33):

Port 4 (bun/port=atm:2/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33):

Port 5 (bun/port=atm:3/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33):

Port 6 (bun/port=atm:4/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33):

Port 7 (bun/port=atm:5/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33):

Port 8 (bun/port=atm:6/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33):

Port 9 (bun/port=atm:7/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33):

The above shows the current configuration of the port-based VLAN. It is the same as the default settings.

An example with an altered configuration is shown next.

192.168.1.1 > bridge

192.168.1.1 bridge> portfilter 2 1 3

192.168.1.1 bridge> portfilter 3 1 2

This example sets the allowed outgoing bridge ports of port 2 (ADSL port 1) to port 1 (Ethernet port) and port 3

(ADSL port 2). The allowed outgoing bridge ports of port 3 (ADSL port 2) are set to port 1 (Ethernet port) and

port 2 (ADSL port1). This way ASDL ports 2 and 3 can communicate with each other and the Ethernet port. You

can see the effects of this example by using the following command: