Figure 2-4 Connecting The Power Cord To The Aes-100 And A Power Source - ZyXEL Communications AES-100 User Manual

AES-100 User's Guide
Connect the female end of the power cord to the power receptacle on the rear panel of your AES-100 (just to the
right of the warning sticker) as seen next. Connect the other end of the cord to a power outlet. Make sure that no
objects obstruct the airflow of the fans (located on the side of the unit).

Figure 2-4 Connecting the Power Cord to the AES-100 and a Power Source

2-4 Hardware Overview