Updating With The Repeated Mode - Honda Modular Vehicle Communication Interface User Manual

Updating with the Repeated Mode

If you need to update the same model vehicle, you can save time by selecting Repeated mode at the end of the
update. This allows you to repeat the same system update on several vehicles without having to redo the setup.
To update multiple vehicles, do this:
1. Update the first vehicle as outlined in Instructions for Updating Control Modules/Units.
2. When the update is done, the MVCI gives you the option to repeat this system update on another vehicle.
Press ENTER to repeat the same system programming on another vehicle with the same model and trim.
3. Disconnect the DLC cable from the current vehicle. Go to the next vehicle, and turn the ignition switch to ON
(II). Then connect the DLC cable (OBD2 cable) to the vehicle, and press ENTER.
NOTE: The MVCI may turn off before you reconnect to the next vehicle. Once you reconnect the DLC, you can
continue the reprogramming procedure.
46