Honda Modular Vehicle Communication Interface User Manual page 2

Safety Definitions
Follow all DANGER, WARNING, IMPORTANT, and NOTE messages in this User Guide. These safety messages
are defined and formatted as follows:
DANGER or WARNING: Means you risk bodily harm and/or possible loss of life.
IMPORTANT: Means the information demands special attention, or that you risk damage to the vehicle or the tool.
NOTE: Provides clarity and helpful tips.
The safety messages cover situations BOSCH is aware of. BOSCH cannot know, evaluate, or advise you as to all
of the possible hazards. You must be certain that any conditions or service procedures encountered do not
jeopardize your personal safety.
Consult the User Guide whenever the DANGER or WARNING symbol ( ) appears on the MVCI. It is important to
follow the actions detailed in the User Guide.
Copyright
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of
BOSCH.
Disclaimer
All information, illustrations, and specifications contained in this User Guide are based on the latest information
available at the time of publication. The right is reserved to make changes at any time without obligation to notify
any person or organization of such revisions or changes. Further, BOSCH shall not be liable for errors contained
herein or for incidental or consequential damages (including lost profits) in connection with the furnishing,
performance, or use of this material. Screens shown in this manual may vary in appearance due to the product
software version at the time of shipment.
US and Canada Regulatory and Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to these two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
In accordance with part 15 of the FCC rules, the user is cautioned that any changes or modifications not expressly
approved by BOSCH Automotive Service Solutions LLC could void the user's authority to operate the equipment.
Canadian EMC Class A
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareillage de la classe A est conforme à ICES-003 Canadien.
CE Mark EMC Directive
This MVCI has been marked with the CE mark. This mark indicates compliance with EEC Directives
EN61326-1: 2006.
ANATEL Regulatory and Compliance Information
This equipment operates on a secondary basis and, consequently, must accept harmful interference, including
from stations of the same kind, and may not cause harmful interference to systems operating on a primary basis.
© 2012 Service Solutions US LLC. All rights reserved. Contributions by American Honda Motor Co., Inc. 2013
2