Wireless; Sdmem Format; Factory Defaults - Honda Modular Vehicle Communication Interface User Manual

Table of Contents

Wireless

This option allows you to enable or disable the wireless feature.

NOTE: For U.S. users, keep the MVCI factory default setting Enable.

To change the wireless option, select Enable under Wireless, then press ENTER.

Highlight the desired option, then press ENTER to save the changes, or press ESC to cancel.

This feature allows you to erase and reformat the SD memory card installed to the MVCI.

This option restores all the factory defaults:

• Clock format is reset to USA/Philippines.

• Language is reset to English.

• Beep menu is reset to Enable.

• Contrast is reset to 46%.

All network configurations are also reset:

• Ethernet IP: 172.19.250.11

• USB Device IP: 172.19.251.11

• Wireless IP: 172.19.253.11

• DHCP Server: Enable

To restore the MVCI to the factory default settings, select Restore under Factory Defaults, then press ENTER.

A confirmation message appears: All Current Settings will be erased. Press ENTER to restore the defaults, or

press ESC to cancel.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Modular Vehicle Communication Interface and is the answer not in the manual?

Mvci