Set Mode - Icom IC-M34 Instruction Manual

7

SET MODE

D LCD contrast setting
Set the LCD contrast level from High contrast or Low con-
trast.
NOTE: The LCD contrast level between High contrast and
Low contrast makes no difference indoors.
High contrast (default)
D Power save function
The power save function reduces current drain by deactivat-
ing the receiver circuit for preset intervals.
• ON : The power save function is turned ON. The power
save function will activate when no signal is received,
and no operation is performed for 5 sec.
• OFF : The power save function is turned OFF.
Power save ON
(default)
20
"LC"
Push
Low contrast
"PS"
Push
Power save OFF
D Squelch sensitivity
When this function is turned ON, rejection of noise is im-
proved so that the squelch is not easily affected by noise.
Push
Squelch sensitivity
OFF (default)
D Low fix function
(Appears only when the optional battery case is attached.)
When this function is turned ON, the output power is fixed to
low except for Channel 16.
Push
Low fix function
OFF (default)
"SS"
Squelch sensitivity
ON
"LF"
Low fix function ON