Set Mode; Set Mode Programming - Icom IC-M34 Instruction Manual

■ Set mode programming

Set mode is used to change the settings for 12 transceiver
functions: Beep tone function, Weather alert function, Prior-
ity scan function, Scan resume timer, Auto scan function,
Dual/Tri-watch function, Monitor key action, Automatic back-
lighting, LCD contrast setting, Power save function, Squelch
sensitivity and Low fix function*.
*Appears only when the optional battery case is attached.
D SET MODE ITEMS
• Low fix*
• Squelch sensitivity
• Power save
(The display shows the current settings, and the selected function is displayed in the dotted circle.)
• Beep tone • Weather alert
Starting item
: Push or
: Push + [Z]
• Automatic
backlighting
• LCD contrast

SET MODE

D Set mode operation
q Turn power OFF.
w W hile pushing [SQL], turn power ON to enter set mode.
• "bP" appears.
e P ush [SQL] or [Y]/[Z] while pushing and holding [SQL]
to select the desired item, if necessary.
r Push [Y]/[Z] to select the desired setting of the item.
t To exit set mode, push [16].
• Priority scan
*Appears only when the optional
+ [Y]
battery case is attached.
• Monitor key action
7
1
2
3
4
5
6
7
8
• Scan resume timer
9
10
11
12
• Auto scan
13
14
15
16
• Dual/Tri-watch
17