Easy Reference Guides - Cuisinart SmartPower SPB-7CHCN Series Instruction Booklet

2. Add all necessary ingredients to the blender jar, and replace the
cover. You may add more ingredients by lifting the measured
pour lid and dropping ingredients through the fill area. Replace
the measured pour lid after adding ingredients. Do not place
hands in blender jar with blender plugged in.
Note: Add liquid ingredients first, then follow with solid
ingredients. This will provide more consistent blending and prevent
unnecessary stress on the motor.
Note: To remove blender jar cover, lift edge of cover upward.
Lifting measured pour lid will not remove cover.
3. To start blending: Press the On button. The red On LED light
will flash, indicating that the blender is turned on but no speed
has been selected.
4. Press the desired blending speed: Both the On
indicator light and the activated speed indicator light will glow.
The blender will now be functioning at the desired speed. It is
possible to switch speeds without pressing the Off button, by
simply pushing the next desired speed button.
5. To stop the blending process: Re-press the activated speed
button. The blending process will stop. The red On indicator light
will continue to flash to let you know that the blender is still on.
The blender can be completely deactivated and stopped at any
speed by pushing the Off button. You will need to press the On
button again to continue blending.
6. To reset the blender: The unit has an advanced thermal
resettable fuse feature. If the event of an overload condition
the unit will shut down to protect the motor from overheating.
When this happens, to reset the unit, unplug the blender and let
it cool down for a minimum of 15 minutes. Then look to reduce
the contents and/or clear any jams, then restart as noted in the
operating directions.
12
QUICk REFERENCE GUIDE
To activate blender
To begin blending
To change speeds
To pulse
To crush ice
To stop blending
(and deactivate blender)
To stop blending
(in Pulse or Ice Crush mode)
To stop blending in Stir,
Chop, Mix, Purée, or
Liquefy mode
SPEED SELECTION GUIDE
Refer to this guide to choose the best speed for your desired result.
Ingredient/Recipe
Reconstituting frozen
orange juice concentrate
Mayonnaise
Salad dressings
Nuts
Whipping cream
Bread crumbs
Grating citrus zest
Milk shakes
Baby food
Health drinks
Frozen cocktails
Grinding hard cheese
Spices
Ice
Press On – The blender is in On mode.
Press desired speed button.
Press desired speed button.
In On mode press Pulse, then press
and release desired speed button as
needed.
In On mode, press and release
Ice Crush button as needed.
Press Off button.
Release button.
Press speed button again. This will
return the blender to On mode.
Press Off button to turn blender off.
Speed Result
Stir Smooth and full-bodied
Stir Thick and creamy
Stir Desired consistency
Chop Coarse to fine
Mix Thick topping
Mix Uniformly fine
Purée Uniformly fine
Purée Smooth and creamy
Purée Smooth and creamy
Liquefy Smooth and creamy
Liquefy Thick and slushy
Liquefy Coarse to fine
Liquefy Coarse to fine
Ice Crush Snowy