Operating Instructions; Easy Reference Guides - Cuisinart PowerBlend 600 SPB-10 Series Recipe Booklet

OPERATING INSTRUCTIONS

1. Place the motor base of your Cuisinart
Electronic Blender on a flat, sturdy surface. It is important that
the surface be clean and dry. Assemble the blender by following
the assembly instructions. Once the jar is assembled and is in
position on the motor base, plug the Cuisinart
™
600 Electronic Blender into an electrical outlet.
2. Add all necessary ingredients to the blender jar, and replace the
cover. You may add more ingredients by lifting the measured
pour lid and dropping ingredients through the fill area. Replace
the measured pour lid after adding ingredients.
Do not put hands into blender jar with blender plugged in.
NOTE: Add liquid ingredients first, then follow with solid
ingredients. This will provide more consistent blending and
prevent unnecessary stress on the motor.
NOTE: To remove blender jar cover, lift edge of cover upwards.
Lifting measured pour lid will not remove cover.
3. To start blending: Press the On button. The red On
LED light will flash, indicating that the blender is turned on
but no speed has been selected.
4. Press the desired blending speed: Both the On indicator
light and the activated speed indicator light will glow. The
blender will now be functioning at the desired speed. It is
possible to switch speeds without pressing the Off button,
by simply pushing the next desired speed button.
5. To reset the blender: The unit has an advanced thermal,
resettable fuse feature. In the event of an overload condition,
the unit will shut down to protect the motor from overheating.
When this happens reset the unit by unplugging the blender
and let it cool down for a minimum of 15 minutes.
6. To stop the blending process: Re-press the activated speed
button. The blending process will stop. The red On indicator
light will continue to flash to let you know that the blender is
still on and can be reactivated by pushing the desired speed
button. The blender can be completely deactivated and
® ™
PowerBlend 600
® PowerBlend
QUICK REFERENCE GUIDE
To Activate Blender Press On – The blender is in on mode.
To Begin Blending Press desired speed button.
To Change Speeds Press desired speed button.
To Pulse In On mode press Pulse, then press and
release desired speed button as needed.
To Crush Ice In On mode, press and release Ice Crush
button as needed.
To Stop Blending Press Off button.
(and Deactivate Blender)
To Stop Blending Release button.
(in Pulse or Ice crush Mode)
To Stop Blending in Stir, Chop, Press speed button again. This will return
Mix, Purée, or Liquefy the blender to On mode. Press Off button
Mode to turn blender off.
SPEED SELECTION GUIDE
Refer to this guide to choose the best speed for your desired result.
Ingredient/Recipe Speed
Reconstituting frozen
orange juice concentrate Stir
Mayonnaise Stir
Salad dressings Stir
Nuts Chop
Whipping cream Mix
Bread crumbs Mix
Grating citrus zest Purée
Milk shakes Purée
Baby food Purée
Health drinks Liquefy
Frozen cocktails Liquefy
Grinding hard cheese Liquefy
Ice Ice Crush
Result
Smooth and full-bodied
Thick and creamy
Desired consistency
Coarse to fine
Thick topping
Uniformly fine
Uniformly fine
Smooth and creamy
Smooth and creamy
Smooth and creamy
Thick and slushy
Coarse to fine
Snowy
5