Download  Print this page

I 2 Of 5 Check Digit Verification; Transmit I 2 Of 5 Check Digit - Philips Pocket Memo DPM8500 Configuration Manual

Hide thumbs

Advertisement

digit numbers must always be preceded by a leading zero). Numeric bar codes begin on
Length Within Range - Select this option to decode only codes within a specified range. For example, to decode I 2 of 5
selection or cancel an incorrect entry, scan
symbols containing between 4 and 12 characters, first scan I 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single
digit numbers must always be preceded by a leading zero). Numeric bar codes begin on
Length Within Range - Select this option to decode only codes within a specified range. For example, to decode I 2 of 5 symbols containing between
selection or cancel an incorrect entry, scan
4 and 12 characters, first scan I 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero).
Numeric bar codes begin on page 56. To change the selection or cancel an incorrect entry, scan Cancel on page 57.
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters.
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters.
Selecting this option may lead to misdecodes for I 2 of 5 codes.
NOTE
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters.
NOTE: Selecting this option may lead to misdecodes for I 2 of 5 codes.
Selecting this option may lead to misdecodes for I 2 of 5 codes.
NOTE

I 2 of 5 Check Digit Verification

Parameter # 31h
I 2 of 5 Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified algorithm,
Parameter # 31h
either USS (Uniform Symbology Specification), or OPCC (Optical Product Code Council).
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified algorithm, either USS (Uniform
Symbology Specification), or OPCC (Optical Product Code Council).

Transmit I 2 of 5 Check Digit

Parameter # 2Ch
Scan this symbol to transmit the check digit with the data.
40
Cancel on page
4-74.
Cancel on page
4-74.
I 2 of 5 - Length Within Range
I 2 of 5 - Length Within Range
I 2 of 5 - Any Length
I 2 of 5 - Any Length
*Disable
(00h)
USS Check Digit
(01h)
OPCC Check Digit
(02h)
Transmit I 2 of 5 Check Digit (Enable)
(01h)
page
4-73. To change the
page
4-73. To change the
Parameter Menus 4 - 49
Barcode scanner configuration guide

Advertisement

Table of Contents

   Also See for Philips Pocket Memo DPM8500

   Related Content for Philips Pocket Memo DPM8500

Comments to this Manuals

Symbols: 0
Latest comments: