Code 39 Check Digit Verification - Philips SpeechMike Configuration Manual

28 Advanced Scanner Configuration Guide
Length Within Range - This option limits decodes to only those Code 39 symbols within a specified range. For
example, to decode Code 39 symbols containing between 4 and 12 characters, first scan Code 39 - Length Within
Range. Then scan 0, 4, 1, and 2. Numeric bar codes begin on page 51. To change the selection or cancel an
incorrect entry, scan Cancel on page 51.
Code 39 - Length Within Range
Any Length - Scan this option to decode Code 39 symbols containing any number of characters.
Code 39 - Any Length

Code 39 Check Digit Verification

When this feature is enabled, the scanner checks the integrity of all Code 39 symbols to verify that the data
complies with specified check digit algorithm. Only those Code 39 symbols which include a modulo 43 check digit
are decoded. Only enable this feature if your Code 39 symbols contain a module 43 check digit.
Verify Code 39 Check Digit
*Do Not Verify Code 39 Check Digit
Revision: 2.0 , technical changes excepted