Enable/Disable Gs1 Databar Expanded; Convert Gs1 Databar To Upc/Ean - Philips Pocket Memo DPM8500 Configuration Manual

Enable/Disable GS1 DataBar Expanded

Parameter # F0h 54h
Parameter # F0h 54h
To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below.
Enable/Disable GS1 DataBar Expanded
To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below.
Parameter # F0h 54h
To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below.

Convert GS1 DataBar to UPC/EAN

Convert GS1 DataBar to UPC/EAN
Parameter # F0h 8Dh
Convert GS1 DataBar to UPC/EAN
Parameter # F0h 8Dh
Parameter # F0h 8Dh
This parameter only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols. When this conversion is
This parameter only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols. When this conversion is enabled, GS1 DataBar
enabled, GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols encoding a single zero as the first digit have the
This parameter only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols. When this conversion is
leading '010' stripped and the bar code reported as EAN-13. Omnidirectional and GS1 DataBar Limited symbols encoding a single zero as the first digit have the leading '010' stripped and the bar code reported as
enabled, GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols encoding a single zero as the first digit have the
EAN-13.
Bar codes beginning with two or more zeros but not six zeros have the leading '0100' stripped and the bar code reported as
leading '010' stripped and the bar code reported as EAN-13.
UPC-A. The UPC-A Preamble parameter to transmit the system character and country code applies to converted bar
Bar codes beginning with two or more zeros but not six zeros have the leading '0100' stripped and the bar code reported as UPC-A. The UPC-A
Bar codes beginning with two or more zeros but not six zeros have the leading '0100' stripped and the bar code reported as
codes. Note that neither the system character nor the check digit can be stripped.
Preamble parameter to transmit the system character and country code applies to converted bar codes. Note that neither the system character nor
UPC-A. The UPC-A Preamble parameter to transmit the system character and country code applies to converted bar
the check digit can be stripped.
codes. Note that neither the system character nor the check digit can be stripped.
Barcode scanner configuration guide
*Enable GS1 DataBar Expanded
(01h)
*Enable GS1 DataBar Expanded
(01h)
Disable GS1 DataBar Expanded
(00h)
Disable GS1 DataBar Expanded
(00h)
Enable Convert GS1 DataBar to UPC/EAN
Enable Convert GS1 DataBar to UPC/EAN
*Disable Convert GS1 DataBar to UPC/EAN
*Disable Convert GS1 DataBar to UPC/EAN
55