Enable/Disable Code 39 Full Ascii - Philips Pocket Memo DPM8500 Configuration Manual

Enable/Disable Code 39 Full ASCII

Parameter # 11h
Enable/Disable Code 39 Full ASCII
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or
Parameter # 11h
disable Code 39 Full ASCII, scan the appropriate bar code below.
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan
the appropriate bar code below.
NOTE: Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If the Enable Trioptic Code 39 setting is not accepted*, disable
Code 39 Full ASCII and try again.
Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If the Enable Trioptic Code
NOTE
39 setting is not accepted*, disable Code 39 Full ASCII and try again.
*An SSI parameter entry error, event ID 07h, is sent to the host if packeted data communication is enabled to inform the user that the parameter
change was not accepted.
*An SSI parameter entry error, event ID 07h, is sent to the host if packeted data communication is
enabled to inform the user that the parameter change was not accepted.
Barcode scanner configuration guide
Enable Code 39 Full ASCII
(00h)
*
Disable Code 39 Full ASCII
(00h)
33