Set Lengths For Code 128 - Philips Pocket Memo DPM8500 Configuration Manual

Hide thumbs Also See for Pocket Memo DPM8500:
Table of Contents

Advertisement

Set Lengths for Code 128

Parameter # L1 = D1h L2 = D2h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for
Code 128 to any length, one or two discrete lengths, or lengths within a specific range.
NOTE: When setting lengths for different bar code types, enter a leading zero for single digit numbers.
• One Discrete Length - Select this option to decode only Code 128 symbols containing a selected length. Select the length using the numeric bar
codes beginning on page 56. For example, to decode only Code 128 symbols with 14 characters, scan Code 128 - One Discrete Length, then
scan 1 followed by 4. To correct an error or change the selection, scan Cancel on page 57.
• Two Discrete Lengths - Select this option to decode only Code 128 symbols containing either of two selected lengths. Select lengths using the
numeric bar codes beginning on page 56. For example, to decode only Code 128 symbols containing either 2 or 14 characters, select Code 128 -
4 - 32 SE655 Decoded Linear Imaging Engine
Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or change the selection, scan Cancel on page 57.
• Length Within Range - Select this option to decode a Code 128 symbol with a specific length range. Select lengths using numeric bar codes
beginning on page 56. For example, to decode Code 128 symbols containing between 4 and 12 characters, first scan Code 128 - Length Within
Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan Cancel on page
Set Lengths for Code 128 (continued)
57.
• Any Length - Select this option to decode Code 128 symbols containing any number of characters within the digital scanner' s capability.
Barcode scanner configuration guide
Code 128 - One Discrete Length
Code 128 - Two Discrete Lengths
Code 128 - Length Within Range
*Code 128 - Any Length
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents