Selecting Excitation Filters (Ex Filters); Selection Of Barrier Filter (Ba Filter) - Nikon ECLIPSE 50i Instructions Manual

Hide thumbs Also See for ECLIPSE 50i:
Table of Contents

Advertisement

Selecting excitation filters (EX filters)

3.17.1
Excitation filters allow selective transmission of
light (excitation light) in the waveband required for
fluorescent light emissions from the specimen,
blocking light of all other wavelengths. The range
of wavelengths allowed to pass through a filter is
referred to as bandwidth.
The range of the bandwidth of the excitation filter
determines the brightness of the fluorescent image,
the generation of self-fluorescence (fluorescence
resulting from substances other than fluorescent
pigments), and degree of fading. The broader the
bandwidth, the greater the amount of excitation
light irradiated onto the specimen, increasing
brightness. However, this also increases the
amount of self-fluorescence and causes faster color
fading. Narrow bandwidth reduces the amount of
excitation light striking the specimen and causes
the image to appear darker, but reduces
self-fluorescence and fading. For specimens with
pronounced self-fluorescence, use excitation filters
with a narrow bandwidth (note that this will make
the fluorescent image darker).
Excitation filters are exposed to strong light during
operations and tend to age rapidly. Replace the
filter at intervals determined by usage.
Brightness of fluorescent image
Generation of self-fluorescence
Degree of color fading

Selection of barrier filter (BA filter)

3.17.2
The barrier filter allows only fluorescent light emitted by the specimen to pass, blocking
excitation light. This allows viewing of a fluorescent image without excess illumination (dark
background).
There are two types of barrier filters: LP filters block all light below a certain wavelength but
pass all light of longer wavelengths. BP filters pass only light of a certain waveband, blocking all
other light. Use the filter type appropriate for your intended purpose.
Chapter 3 Individual Operations
3.17 Selecting Fluorescent Filters
Narrow
EX filter bandwidth
Dark
Low
Low
55
EX filter
Bandwidth
0
Wavelength
Bright
3
Wide
High
High

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eclipse 55i

Table of Contents