Editing Telex Messages - JRC JSS-2150 Instruction Manual

4 . 2 . 6 . 4

Editing telex messages

4 . 2 . 6 . 4
When communicating in the telex mode, the message file can be sent, which is prepared
beforehand as follows.
■ ■
Procedure
1 .
1 .
1 .
If displaying the message of "Press Enter key to get the access right in the NBDP
mode..." on the data terminal, press Enter key on the keyboard.
The operation of the data
terminal becomes possible in the
telex mode, except when the
controller is used.
2 .
2 .
2 .
On the main menu and the dropdown menu, select File
The editing screen is
displayed as shown at right.
To edit an existing file, select
File Edit existing file.
3 .
3 .
3 .
Make the message with the keyboard.
Besides alphabets and the figures, following signs can be input from the keyboard.
- ? : ( ) . , ' = / +
Only the capital letter can be used for the alphabet.
When the number of characters for each line becomes more than 70 or a specified number,
line feed is automatically inserted.
When pressing the Tab key, inserts the space of the number set by F2 Set tab is inserted.
4 .
4 .
4 .
Press F9 (Save & Quit) key when saving the message the file and finishing editing.
After closing the editing screen, returns to the regular screen.
Operation
Edit new file with Enter key.
4-21