Setting Dsc Watch Frequency; Disabling Receiving Alarms For Routine And Safety Calls; Using Medical/Neutral Settings For Urgency Calls; Registering The Ship's Group Id - JRC JSS-2150 Instruction Manual

5.5.2

Setting DSC watch frequency

Set the frequency to watch on the WKR (DSC watch keeping receiver).
■ ■
Procedure
1 .
1 .
1 .
Move the cursor to 2. WKR scanning
FRQ, and press ENT.
The screen as shown at right is displayed.
2 .
2 .
2 .
Press ENT, and set another frequency in
addition to 2187.5 kHz and 8414.5 kHz to
ON.
Note
In accordance with the SOLAS Convention, 2187.5 kHz and 8414.5 kHz cannot be
turned OFF.
5.5.3

Disabling receiving alarms for routine and safety calls

The alarm for routine and safety calls can be disabled as follows.
■ ■
Procedure
To disable the receiving alarms for routine and safety calls, set 3. Safety/Routine alarm
to OFF with the jog dial.
5.5.4

Using medical/neutral settings for urgency calls

Set the condition so that an urgency area call containing the additional subject of either "Medical
transportation" or "Neutral nationality" can be sent. Additionally, note that this setting returns to
the default setting (OFF) if the power is turned off.
■ ■
Procedure
To use these kinds of calls, set 4. Medical/Neutral use condition to ON with the jog dial.
5.5.5

Registering the ship's group ID

Register the group ID (group ship ID number) for receiving group calls.
■ ■
Procedure
Register the group ID at 5. Group ID using a 9-digit number (leftmost digit fixed to 0).
Settings & Registrations
7.5.2)WKR scanning FRQ
1.Registration
- CH1 2187.5kHz :(Const)
- CH2 4207.5kHz :OFF
- CH3 6312.0kHz :ON
- CH4 8414.5kHz :(Const)
- CH5 12577.0kHz :ON
- CH6 16804.5kHz :OFF
0.Back
5-11