Printer (Nkg-800) - JRC JSS-2150 Instruction Manual

10.4 Printer (NKG-800)

The print head of the NKG-800 printer may be very hot after printing. Do
not touch the print head of the printer. Make sure that the print head is cool
before replacing the paper or cleaning the print head.
Do not use the NKG-800 printer if there is no ink ribbon cartridge or paper.
Do not twist the ink ribbon when installing the ink ribbon cartridge.
Before opening and closing the cover of the NKG-800 printer, turn off the
printer. Wait more than 2 seconds after turning the printer off before turning it
back on again so it can initialize correctly.
Printer cover
Print head
Contacts the roll
paper for printing.
The following shows the functions of the operation panel.
P.PARK
Paper Park Feed Form
Rewinds the roll Feeds paper one
paper. page at a time.
Note 1: Before performing P.PARK/FF/LF/NLQ, press ONLINE to set the printer offline (lamp out).
Note 2: When the printer runs out of roll paper, the P.OUT lamp lights and the printer
automatically goes offline.
CAUTION
Roll support cover
Prevents printed roll paper
from being wound back in.
Roll paper cover
Operation
panel
Power switch
Platen
Paper is fed in contact
with this platen when the
friction lever is pushed
towards the back.
FF LF
Line Feed
Feeds the paper
one line at a
time.
Roll paper
Roll paper stand
Roll bar
Passes through
the printing roll
paper.
Roll paper cutter
Paper feed knob
Friction lever
When replacing the roll paper,
pull this lever towards the front
before inserting the paper, and
return it towards the back after
paper is inserted.
NLQ
High-quality Printer Ready
Printing Setting
Switches the The printer is
printer to the ready for
high-quality printing when
printing mode. the lamp is lit.
Options Operation
ONLINE
10-5