Husqvarna AUTOMOWER 305 Operator's Manual page 27

• - In the passage, the guide wire must therefore
be placed so that the mower has as much
space to run in as possible. The distance
between the boundary wire and the guide wire
must however be at least 30 cm.
If the guide wire has to be installed on a steep slope,
it is an advantage to lay the wire at an angle to the
slope. This makes it easier for the mower to follow the
guide wire on the slope.
Avoid laying the wire at sharp angles. This can make
it difficult for the mower to follow the guide wire.
4. Run the guide wire to the spot on the boundary
wire where you want to make the connection.
5. Lift out the boundary wire. Cut off the boundary
wire using a pair of wire cutters.
30 - English
3. INSTALLATION
Maximum
distance
At least 30 cm
At least 2 m
135º
135º
90º