Presentation - Husqvarna AUTOMOWER 305 Operator's Manual

2. Presentation

This chapter contains information that is important to
be aware of when planning the installation.
An installation of Husqvarna Automower
main components:
• The Automower
mows the lawn by essentially operating in a
random pattern. The mower is powered by a
maintenance-free battery.
• Charging station, where your Automower
returns when the charge level in the battery
becomes too low.
The charging station has three functions:
• To send control signals along the boundary
wire.
• Sending control signals in the guide wire so
that Automower
• To charge Automower
• Transformer, which is connected between the
charging station and a 230V wall socket. The
transformer is connected to the wall socket and
to the charging station using a 10 m long low
voltage cable. The low voltage cable must not be
shortened or extended.
• Wire, laid in a loop around Automower
area. The boundary wire is laid around the edges
of the lawn and around objects and plants that
the mower must not run into. The wire is also
used as the guide wire.
• The wire supplied with the installation is 150 m
long. If this is not sufficient more wire can be
purchased, with a connector, and spliced onto
the existing wire.
The maximum permitted length for the loop wire is
250 m.
10 - English
2. PRESENTATION
® includes four
® is a robotic lawn mower that
can find the charging station.
®
battery.
®
®
®
working