Adjusting The Cutting Height - Husqvarna AUTOMOWER 305 Operator's Manual

4.6 Adjusting the cutting height

The cutting height can be varied from MIN (2 cm) to
MAX (5 cm).
During the first week after a new installation, the
cutting height must be set to MAX to avoid damaging
the loop wire. After this, the cutting height can be
lowered one step every week until the desired cutting
height has been reached.
If the grass is long it is appropriate to let Automower
start mowing at the MAX cutting height. Once the
grass is shorter, you can gradually lower the cutting
height.
To adjust the cutting height:
1. Press the STOP button to stop the mower and
open the cover.
2. Turn the height adjustment knob to the required
position. The selected position is indicated by the
orange column that can be seen by the knob
through the window.
• Turn anti-clockwise to raise the cutting height.
• Turn clockwise to lower the cutting height.
4. USE
®
1 2 3 4 5
English - 37