Advertisement
R
STEP. 01
Put the product box on an even and flat surface and
cut the box along the suture line with a cutter.
Please make sure the cutter blade doesn't enter
deep enough to scratch the product surface. Also,
be careful not to hurt yourself.
STEP. 02
Once the box is open, you will see a package fully
covering the product.
Open the top of the box wide in four directions and
remove the product package and you will see the top
surface of the product.
STEP. 03
This product is somewhat bit heavy, weighing 10 Kg.
It is recommended to use both of your hands to put
the product out of the box. Hold it with your palms
for safety.
Street Light
(HR)
Installation & Operation User Guide
The information in this document is subject to change without notice
Copyright 1991 ~ 2012 KMW, INC. All Rights Reserved
©
Document Revision V0.61 2013.01.15
9
Pages
Advertisement
