Advertisement
R
STEP. 07
The brightness sensor has a directional nature as
seen in the following figure:
Among the three connection parts, one is designed
to be long and wide and the others short and narrow.
Please remember that forced installation against the
direction nature may damage the lamp connection
part.
The brightness sensor is optional and it may look
different from what it looks like in the figure if it is
bought by the user.
STEP. 08
Align the brightness sensor with the lamp for con-
nection and impose little force downward until they
are tightly bonded.
Turn the brightness sensor clockwise while pushing
it inside.
STEP. 09
If you complete the above procedure without fail,
the Electronic Auto Switch will keep rotating until it
is fixed to the lamp connection part like the follow-
ing figure:
Street Light
(HR)
Installation & Operation User Guide
The information in this document is subject to change without notice
Clockwise
Copyright 1991 ~ 2012 KMW, INC. All Rights Reserved
©
Document Revision V0.61 2013.01.15
11
Pages
Advertisement
