Advertisement
R
STEP. 16
Keep the lamp and the light pole so arranged that
the AC power cable is not stuck between them be-
fore you bond them together.
STEP. 17
Attach the lamp to the light pole like the fol-
lowing figure:
STEP. 18
Once the lamp is installed, use fixing bolts to fix it to
the light pole.
When you remove the cap on top of the lamp as il-
lustrated in the figure, you will see three lamp fixing
nuts called M10 Set Screw (Mood Bolt) inside.
Use a hexagonal wrench to tighten the fixing bolts
until the lamp is tightly bonded with the light pole.
Once the fixing bolts are in their positions, recover
the top with the cap.
Street Light
(HR)
Installation & Operation User Guide
The information in this document is subject to change without notice
Copyright 1991 ~ 2012 KMW, INC. All Rights Reserved
©
Document Revision V0.61 2013.01.15
14
Pages
Advertisement
