Advertisement
R
STEP. 13
Open the SMPS part and hang it on the hook before
you start wiring.
STEP. 14
Insert the AC power cable behind the arm like the fol-
lowing figure:
HR Model basically does not supply the AC power
cable. If necessary, it shall be purchased by the user.
STEP. 15
Once the AC power cable moved inside the lamp,
tension it with a margin for later connection with the
twister.
Street Light
(HR)
Installation & Operation User Guide
The information in this document is subject to change without notice
Copyright 1991 ~ 2012 KMW, INC. All Rights Reserved
©
Document Revision V0.61 2013.01.15
13
Pages
Advertisement
