Advertisement
R
1) Scope Overview
This manual describes how to compose, install, and operate LED streetlamps.
2) LED Streetlamp Apparatus (LED Streetlight)
A streetlamp is a lamp that is installed on the side of least four-lane roads to improve traffic safety of vehi-
cles and civilians as well as traffic efficiency.
3) Usage
This is a traffic safety facility not only for expressways, streets, parking lots, and industrial facilities, but also
for the safety on motorways or sidewalks. It is roughly divided into road lamps, sidewalk lamps, overbridge
lamps, and high-mast lightings. The shape varies with the road feature and the beauty concept of your city
to give you a lot of choices.
The HR product lineup is 85W, 110W, 150W and all of them are proud of their high lamp efficiency over
100 lm/W. The lamp efficiencies are 8,500 lm, 11,000 lm, and 15,000 lm, respectively.
The light distribution type is diversified. It supports Type II-S, Type II-M, Type III-S, Type-III-M to enable
streetlamp installation in all environments.
1) Vertically Arranged LED Module Method
HR adopted vertically arranged LED moduled unlike existing streetlamps. The vertically arranged LED mod-
ules can help to minimize the heat generating from the LED and further guarantee long life of the device in
the long run.
2) An Electronic Auto Switch Is Attached
On top of a product is installed an electronic Auto Switch. When the intensity of illumination reaches a certain
level, the lamp will be automatically turned off first and then it will be automatically turned off while it is not
securing an illumination with sufficient intensity. In other words, it is a very convenient function to automati-
cally turn on or off the lamp without operating the switch whenever necessary.
3) Converter (SMPS) Exchange without Tools
HR adopted the Locking Lactch type to the locking device in the SMPS enclosure part to open or close the
enclosure without any tool when you are exchanging the SMPS. In addition, the internal SMPS is fixed not
by bolts but not sockets for more comfortable maintenance.
4) Silver Nanoreflecting Plate
A nanoreflecting plate is expected to make effect on raising the intensity of illumination, i.e., improving the brightness
when it is used for illumination. Although we install a lamp with lower wattage than those of the other companies, we
can realize the intensity of illumination equivalent to or higher than them, eventually with more outstanding electricity-
saving effect.
Street Light
(HR)
Installation & Operation User Guide
The information in this document is subject to change without notice
Copyright 1991 ~ 2012 KMW, INC. All Rights Reserved
©
Document Revision V0.61 2013.01.15
3
Pages
Advertisement
