Advertisement
R
STEP. 10
Open the SMPS part from the main body for AC pow-
er cable wiring.
To begin with, use your thumb to push the latch lock-
er upward and pull the lower part like the following
figure:
When you zoom in the image, the part that was hid-
den for easier description purpose will appear
STEP. 11
Bend up vled part like the following figure:
When you zoom in the image, the part that was hid-
den for easier description purpose will appear
STEP. 12
Unlock the latched part and open the SMPS main
body.
Street Light
(HR)
Installation & Operation User Guide
The information in this document is subject to change without notice
Copyright 1991 ~ 2012 KMW, INC. All Rights Reserved
©
Document Revision V0.61 2013.01.15
12
Pages
Advertisement
