Advertisement
R
STEP. 19
Be sure to bond the AC power cable with the SMPS
cable. At first, use the twister to connect the two
cores of the white cable (N) with each other.
Each cable comes from the core after it is connected
to the AC power cable and the lamp body.
Be sure to use only the cable in the same color for
power cable connection. Wrong wiring may give a criti-
cal damage to the product at the time of power supply.
STEP. 20
Use the twister to connect the two cores of the black
cable (N) with each other like the following figure:
Each cable comes from the core after it is connected
to the AC power cable and the lamp body.
Be sure to use only the cable in the same color for
power cable connection. Wrong wiring may give a criti-
cal damage to the product at the time of power supply.
STEP. 21
Use the twister to connect two cores of a yellowish
green and yellow mixture cable (FG) with each other.
Each cable comes from the core after it is connected
to the AC power cable and the lamp body.
Be sure to use only the cable in the same color for
power cable connection. Wrong wiring may give a criti-
cal damage to the product at the time of power supply.
Street Light
(HR)
Installation & Operation User Guide
The information in this document is subject to change without notice
Copyright 1991 ~ 2012 KMW, INC. All Rights Reserved
©
Document Revision V0.61 2013.01.15
15
Pages
Advertisement
