Kirby Morgan EXO original Operation & Maintenance Manual page 4

Regulator full face mask
Hide thumbs Also See for EXO original:
Table of Contents

Advertisement

EXO Full Face Mask Manual
WARNING: This mask was completely checked and should be ready to dive as it
was shipped from the factory. However, it is always the diver's responsibility to check
all the components of the mask prior to diving.
This manual is supplied to the original purchaser of this mask. If you have any questions about
the use of the mask or you need another copy of this manual, Part Number 100-030, contact
Diving Systems International. If you have any questions regarding the use, maintenance, or
operation of this mask, contact Diving Systems International at (805) 965-8538.
DANGER: The EXO Full Face Mask is not equipped or lubricated for oxygen
service. Using this mask with oxygen percentages above 23.5% by volume may lead to
explosions that can result in serious injury or death.
Diving Systems International regards the use of any breathing gas mixture greater than 23.5%
oxygen to be treated as oxygen. This belief is in keeping with the recommendations set forth
by the National Fire Protection Association (NFPA), Compressed Gas Association (CGA), and
the American Society for Testing and Materials (ASTM).
Any diving helmet, full face mask, regulator, control console or breathing life support item
manufactured or sold by Diving Systems International must not be used with breathing gas
mixtures in excess of 23.5% oxygen without first ensuring that all gas transporting components
have been cleaned for oxygen service, have oxygen compatible soft goods lubricated with an
approved oxygen compatible lubricant such as Krytox or Christo Lube grease.
iv
Document # 001026001

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exo standardExo balanced

Table of Contents