Table of Contents
Advertisement
Service Manual – Floortec 760
Removal and Installation
Drive system control cable, disassembly/assembly
Disassembly
1
Remove the drive belt (see the procedure in the
relevant paragraph)
2
Unscrew the nut (B) on the front end of the drive
system control cable (A)
3
Disconnect the cable (A) from the slot (C) on the
holder
4
Disengage the spring terminal (D) from the
tensioner (E)
5
Loosen the nut (F) on the handlebar
6
Disconnect the cable (G) from the slot (H) on the
holder
7
Remove the terminal (I) of the cable (G) from the
housing of the drive control lever (J)
8
Retrieve the drive system control cable (G)
Assembly
9
Assemble the drive system control cable in the
reverse order of disassembly
10 Adjust the drive system control cable (see the
procedure in the relevant paragraph)
Wheel System, Traction
P200356
135
Advertisement
Table of Contents
Troubleshooting
