Service Manual – Floortec 760
Right Side Broom Control Cable Removal/Installation (Continues)
8
Remove the screw (K) of the cable front
terminal
9
Loosen the nut (L)
10 Disengage the cable (M) from the slot (N)
11 Cut the clamps (P) retaining the cable (O)
12 Unscrew the nut (Q) and remove the lever (R)
with the cable
Assembly
13 Assemble the cable in the reverse order of
disassembly, and note the following:
• After installation, perform the adjustment of
the cable (M) (see the procedure for adjusting
the side broom microswitch)
Side Broom System
127
P200351