Stand - HP TouchSmart Elite 7320 Maintenance & Service Manual
All-in-one business pc
Hide thumbs
Also See for TouchSmart Elite 7320:
- Getting started (19 pages) ,
- User manual (74 pages) ,
- Specification (9 pages)
Table of Contents
Advertisement
Stand
Description
Stand
The stand is secured with 8 screws.
To remove the stand:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the rear cover (see
3.
To keep the stand from binding the screws, position the computer with the front facing downward
and the stand not touching the surface.
4.
Remove the 8 Phillips screws (4 from each side) (1) that secure the stand to the computer.
5.
Pull the stand down slightly, and then lift it off the computer (2).
Figure 7-2
To replace the stand, reverse the removal procedures.
42
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
40).
Rear Cover on page
Removing the stand
Preparing to Disassemble the Computer
41).
Spare part number
671591-001
Advertisement
Table of Contents
