WLAN Module
Description
802.11b/g/n (2x2) WLAN card
HP WLAN combo 802.11b/g/n + Bluetooth 2.1 card
802.11b/g/n (1x1) WLAN module
The WLAN module is secured with 2 screws and has 1 connected antenna.
Figure 7-26
To remove the WLAN module:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the rear cover (see
3.
Remove the system board cover (see
4.
Disconnect the antenna cable from the module (1).
62
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
WLAN module location
40).
Rear Cover on page
Preparing to Disassemble the Computer
41).
System Board Cover on page
Spare part number
654602-001
652279-001
634906-001
60).