Activating A Change - User Mode; Regional Settings - Motorola Omnii User Manual

Activating a Change – User Mode
To activate changes, you'll need to switch from Administrator to User Mode. This Kiosk Access screen is
displayed automatically once you've finished making changes and have tapped on OK.
• In the tab where you've made the changes, tap on OK. In the next screen – the Kiosk menu screen – tap
on OK.
A new screen, the Kiosk Access screen, is displayed.
• Tap on Change to User mode.
You'll need to reset the Omnii so that the changes you specified can take effect.
• Tap on Yes to reset the Omnii and activate your changes.

Regional Settings

To display the Regional Settings screen, tap on Start>Settings, and then tap on the System icon followed by
the Regional Settings icon.
Settings 4 - 87