Mode Tab - Motorola Omnii User Manual

Serial server enables the Serial Port Profile server; a Serial Port can be selected from the drop-down menu.
Keep in mind that when a port is chosen, an application must be open (connected) to the chosen port for a
remote device to be able to connect.
Scanner server enables a Serial Port Profile server and then relays it to the Scanner Service (SCS). This is
used for Bluetooth barcode scanners that operate in client mode. SCS opens the server port and handles the
scanner input.
OBEX OPP server enables the Object Push Profile server. A warm reset must be performed on the Omnii after
a change is made to this option. The OPP Server allows other Bluetooth devices to send files to this device.
• Tap on the checkbox to activate the server – the associated port name is displayed beside the
server name.

Mode Tab

When Turn on Bluetooth is checked, Bluetooth features are available. If this option is disabled, you cannot
send or receive information using Bluetooth.
When Discoverable is enabled, other Bluetooth devices within range (approximately 10 meters) can detect
your Omnii and can establish a bond or use a Bluetooth service. Note that other devices can detect your unit
whether or not a bond has been created.
If Allow Bluetooth to wake system is enabled, this feature allows remote Bluetooth devices to wake the Omnii
by requesting a Bluetooth service that requires host intervention. This feature can also be used, when the
Omnii is waking from suspend, to significantly to reduce the initialization time of Bluetooth system.
Settings 4 - 19