Selecting A Camera; Setting The Active Preset; Viewing A Preset - Motorola Omnii User Manual

Barcode Presets
Figure B-2
This window lists all the presets, both predefined and the custom. Presets are identified as follows:
• Predefined presets are marked as read-only. For a description, review
• Custom presets are marked as read and write.
• One preset – either predefined or custom – is marked as active.
NOTE
The top portion of the window displays the barcode decoding presets.

Selecting a Camera

One camera must be selected for configuration. To select a camera:
• Tap on the Camera Presets drop-down menu to view the camera options.
• Choose a camera – either Imager, the imager located at the top of the unit, or Color Camera, the camera
located at back of the Omnii.
IMPORTANT

Setting the Active Preset

An active preset has an A to the right; in
section, the active preset is Default. To set an active preset:
• Highlight the preset, and tap on the Activate button.

Viewing a Preset

To view the parameter settings in a preset:
• Highlight a preset, and tap on the View button.
The associated preset window is displayed.
Currently, only the 'Imager' can be used to read barcodes. The
Color Camera is limited to taking photos.
Figure B-2 Barcode Presets on page B-9
Imagers Applet B - 9
"Predefined Presets" on page
on at the beginning of this
B-3.