Motorola Omnii User Manual page 245

Connecting ST1002 to vehicle power and communications in a typical setup
Figure 5-21
Omnii
ST1002
USB and Serial access*
* Note: The serial port is 5 VDC, 1 A maximum power out and is defaulted to off.
To enable power to this port, in your Omnii desktop, go to Start>Settings>System>Scanners,
which opens the Scanner Settings menus. In the Ports menu, select
under the COM6 port.
NOTE
For the CA3002 Vehicle Power Outlet (CLA) Adaptor, replace with same fuse
type and rating.
MT3326
Mounting Bracket
CA3001 Cable
PS1350
Pre-regulator
MT3325
Arm/Ball Kit
MT3502 Circular Plate
OR
OR
CA3002 Vehicle Power
Outlet (CLA) Adaptor
ON
for the Power parameter
Accessories 5 - 25