Motorola Omnii User Manual page 286

C - 10 Omnii (Windows Embedded Hand-Held 6.5) User Guide
Short Code
When enabled, this parameter allows scanning of short I 2 of 5 barcodes (2 characters). When disabled, these
short barcodes are rejected.
Enabling "Short Code" may reduce the robustness of the decoding since the hand-held must decode more
potential barcodes; it is therefore not recommended for general-purpose barcodes with 4 or more characters.
Verify
The value entered for this parameter determines the number of correct additional decodes required after the
initial decode, prior to a barcode being accepted. Higher values significantly increase the time it takes to
decode a barcode but also improve the reliability of the decoded barcode.
Security
This parameter controls the tolerance for decoding edge-to-edge barcodes (Code 93, Code 128, UPC/EAN).
Lower values have a lower tolerance for misreads, but they also increase the time it takes to decode the
barcode. The default value of 30 is generally a good compromise setting.
The barcode symbologies for the scanner are listed in table following.
Code 39
Code 128
EAN 13
EAN 8
UPC-A
UPC-E
Codabar (disabled)
Non-Decoded Barcode Symbologies
Code 93 (disabled)
Code 11 (disabled)
Interleaved 2 of 5 (disabled)
MSI Plessey (disabled)
Discrete 2 of 5 (disabled)
IATA 2 of 5 (disabled)