Power Accessories; Snap Modules - Motorola Omnii User Manual

5 - 6 Omnii (Windows Embedded Hand-Held 6.5) User Guide
• Place Omnii into the holster with the grip extending back through the custom opening.
• If desired, attach the tether to the pistol grip.
Hard Shell Holster (pistol grip tether not shown)
Figure 5-4

Power Accessories

The following accessories can be ordered for your Omnii:
AC Wall Adaptor
Vehicle Power Outlet Adaptor
Snap Module – Charger Only
Snap Module – USB Host/Client plus Charger
Snap Module – DE9M powered serial plus Charger

Snap Modules

NOTE
The Snap Modules are shipped with their own quick start guide (Omnii Snap
Modules Quick Start Guide, PN 8000220). The guide should be reviewed for
additional information and updates.
Snap Modules are mobile power chargers for Omnii. They are compatible with the AC wall adaptor
(Model ST1050 or ST1050-AR) and the Vehicle Power Outlet Adaptor (Model ST3113).
Three types of Snap Modules are available:
•
Model ST4000
•
Model ST4001
1.1/2.0 Host and USB 2.0 Client connectors and provides a DC IN port. When attached to Omnii, it allows
ActiveSync or Windows Mobile Device Center connectivity with your PC, and the use of a USB device
such as a USB memory key or supported peripheral.
Description
(Charger only variant): powers and charges the hand-held.
(USB variant): powers and charges the hand-held. It provides communications via USB
Model Number
ST1050 or
ST1050-AR
ST3113
ST4000
ST4001
ST4005