Un-Locking The Screen; Single User Mode - Motorola MC 40 User Manual

2 - 14 MC40 User Guide
Recently Used Applications
Figure 2-12
Touch an icon to open it or press
2.

Un-Locking the Screen

Use the Lock screen to protect access to data on the MC40. Some email account require locking the screen.
Refer to the MC40 Integrator Guide for information on setting up the locking feature. The Locking feature
functions differently in Single User mode or Multiple User mode.

Single User Mode

When locked, a pattern, PIN or password is required to unlock the MC40. Press the Power button to lock the
screen. The MC40 also locks after a pre-defined time-out.
Press and release the Power button to wake the MC40.
The Lock screen displays. Slide
enabled, the Pattern screen appears instead of the Lock screen.
If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen.
NOTE If the user enters the PIN, password or pattern incorrectly five times, they must wait 30 seconds before
trying again.
If the user forgets the PIN, password or pattern contact the system administrator.
to return to the current screen.
to the left to unlock the screen. If the Pattern screen unlock feature is