Connecting Using A Bluetooth Gprs Phone - Motorola Omnii User Manual

This is a service-dependent menu – that is, it varies slightly depending on the service chosen in the
Servers tab.
Query Services and Remove Commands
NOTE
The Query Services and Remove commands are available in all service-dependent
menus, regardless of the type of service chosen.
• Query Services displays a Services dialog box where a pairing service is chosen.
• Remove unpairs the highlighted service and deletes the entry from the tab.
OBEX OPP (Object Exchange-Object Push Profile) Commands
The OPP defines two roles – a Push Server and a Push Client. Push Server is the device that provides an
object exchange server. Push Client is the device that pushes and pulls objects to and from the Push Server.
OBEX OPP contains the following unique menu option:
• Send File displays an Open File dialog box where the file to be sent can be selected. When the transmis-
sion begins, another dialog box tracks the progress of the file transmission.
HSP/HFP (Headset Profile/Hands-Free Profile) Service Commands
The HSP (Headset Profile) allows users to connect their device to Bluetooth enabled headsets and other audio
devices.
HSP/HFP services provide the following unique menu options:
• Connect Audio establishes an audio connection to the Bluetooth headset.
• Disconnect Audio disconnects the audio connection from the Bluetooth headset.
• Volume Control displays a dialog box where the headset and microphone volume can be adjusted.

Connecting Using a Bluetooth GPRS Phone

Once you've completed the Bluetooth settings, you can go ahead and set up communication through your
Bluetooth-equipped phone.
Before you begin, make certain that the Bluetooth phone is turned on, that the Bluetooth radios in your Omnii
and phone are enabled (turned on), and that the hand-held and phone are within 10 metres of each other. Both
should be discoverable.
1. Tap on Start>Settings, and then tap on the Connections folder icon.
Settings 4 - 21