ATCOM AT-320 H323 User Manual page 40

AT-320 H323 Phone User Manual (V1.39)
Once the call connection has been established and the ring tone has sounded,
wait for the other party to answer. When the other party answers, you can
begin speaking. When the call is over, put back the handset. The dialed
number has been saved into the buffer.
2. Hand free: Press
phone number you wish to call and press
Once the call connection has been established and the ring tone has sounded,
wait for the other party to answer. When the other party answers, you can
begin speaking. When the call is over, Press
Speaker
number has been saved into the buffer.
3. Blind dialing: Use the keypad to enter the phone number you wish to call and
then press
been established and the ring tone has sounded, wait for the other party to
answer. When the other party answers, you can begin speaking. When the call
is over, Press
buffer.
● Place a call without login the Gatekeeper
If AT-320 IP phone does not login the Gatekeeper, you can place a call by lifting
the handset or pressing
party, and then pressing
● Place a call through Gateway
If AT-320 IP phone does not login the Gatekeeper, you can place a call through
Speaker
and listen for the Internet dial tone. Then input the
Speaker
or to make the call. Once the call connection has
Call
again. The dialed number has been saved into the
and then inputting the IP address of the other
or
or to end the dialing.
Call
again. The dialed
Speaker
Speaker
Call
40