Usage Of The Phone - ATCOM AT-320 H323 User Manual

AT-320 H323 Phone User Manual (V1.39)
operation will be fail.

Usage of the phone

Receiving calls:
AT-320 IP phone can receive incoming calls from other AT-320 IP phone and
devices that support the H.323 protocol. It works just like an ordinary phone for
incoming calls. When it rings, you can receive the call by following methods:
Use handset: Lift the handset and begin speaking. When the call is over, put
the handset back.
Handset to hand free: While receiving call with handset, press
on the keypad and then put down the handset. When the call is over, press
again.
Speaker
Hand free: Press
press
Hand free to handset: While receiving the call with
, pick up the handset to continue the call. When the call is over, put back the
handset.
Note When you communicate with the other party without lifting the handset, please
do not exceed 40 CM from speaker.
Place a call
Call another PA168 IP phone under the same Gatekeeper:
●
1. Handset: Pick up the handset and listen for the Internet dial tone. Then dial the
phone number you wish to call and press
to speak to the other party. When the call is over,
Speaker
again.
Speaker
pressed
Speaker
or to end the dialing.
Call
Speaker
39